Re: Set value of another field based on check box
I tested few different ways
having two controls doing the change.
always the second change is the one that stays, I do not know why.
Announcement
Collapse
The Alpha Software Forum Participation Guidelines
The Alpha Software Forum is a free forum created for Alpha Software Developer Community to ask for help, exchange ideas, and share solutions. Alpha Software strives to create an environment where all members of the community can feel safe to participate. In order to ensure the Alpha Software Forum is a place where all feel welcome, forum participants are expected to behave as follows:
Be sure all comments and threads you post are respectful. Posts that contain any of the following content will be considered a violation of your agreement as a member of the Alpha Software Forum Community and will be moderated:
If a thread or post is found to contain any of the content outlined above, a moderator may choose to take one of the following actions:
Moderators may also rename posts and threads if they are too generic or do not property reflect the content.
Moderators may move threads if they have been posted in the incorrect forum.
Threads/Posts questioning specific moderator decisions or actions (such as "why was a user banned?") are not allowed and will be removed.
The owners of Alpha Software Corporation (Forum Owner) reserve the right to remove, edit, move, or close any thread for any reason; or ban any forum member without notice, reason, or explanation.
Community members are encouraged to click the "Report Post" icon in the lower left of a given post if they feel the post is in violation of the rules. This will alert the Moderators to take a look.
Alpha Software Corporation may amend the guidelines from time to time and may also vary the procedures it sets out where appropriate in a particular case. Your agreement to comply with the guidelines will be deemed agreement to any changes to it.
Bonus TIPS for Successful Posting
Try a Search First
It is highly recommended that a Search be done on your topic before posting, as many questions have been answered in prior posts. As with any search engine, the shorter the search term, the more "hits" will be returned, but the more specific the search term is, the greater the relevance of those "hits". Searching for "table" might well return every message on the board while "tablesum" would greatly restrict the number of messages returned.
When you do post
First, make sure you are posting your question in the correct forum. For example, if you post an issue regarding Desktop applications on the Mobile & Browser Applications board , not only will your question not be seen by the appropriate audience, it may also be removed or relocated.
The more detail you provide about your problem or question, the more likely someone is to understand your request and be able to help. A sample database with a minimum of records (and its support files, zipped together) will make it much easier to diagnose issues with your application. Screen shots of error messages are especially helpful.
When explaining how to reproduce your problem, please be as detailed as possible. Describe every step, click-by-click and keypress-by-keypress. Otherwise when others try to duplicate your problem, they may do something slightly different and end up with different results.
A note about attachments
You may only attach one file to each message. Attachment file size is limited to 2MB. If you need to include several files, you may do so by zipping them into a single archive.
If you forgot to attach your files to your post, please do NOT create a new thread. Instead, reply to your original message and attach the file there.
When attaching screen shots, it is best to attach an image file (.BMP, .JPG, .GIF, .PNG, etc.) or a zip file of several images, as opposed to a Word document containing the screen shots. Because Word documents are prone to viruses, many message board users will not open your Word file, therefore limiting their ability to help you.
Similarly, if you are uploading a zipped archive, you should simply create a .ZIP file and not a self-extracting .EXE as many users will not run your EXE file.
- Be professional in your conduct
- Be kind to others
- Be constructive when giving feedback
- Be open to new ideas and suggestions
- Stay on topic
Be sure all comments and threads you post are respectful. Posts that contain any of the following content will be considered a violation of your agreement as a member of the Alpha Software Forum Community and will be moderated:
- Spam.
- Vulgar language.
- Quotes from private conversations without permission, including pricing and other sales related discussions.
- Personal attacks, insults, or subtle put-downs.
- Harassment, bullying, threatening, mocking, shaming, or deriding anyone.
- Sexist, racist, homophobic, transphobic, ableist, or otherwise discriminatory jokes and language.
- Sexually explicit or violent material, links, or language.
- Pirated, hacked, or copyright-infringing material.
- Encouraging of others to engage in the above behaviors.
If a thread or post is found to contain any of the content outlined above, a moderator may choose to take one of the following actions:
- Remove the Post or Thread - the content is removed from the forum.
- Place the User in Moderation - all posts and new threads must be approved by a moderator before they are posted.
- Temporarily Ban the User - user is banned from forum for a period of time.
- Permanently Ban the User - user is permanently banned from the forum.
Moderators may also rename posts and threads if they are too generic or do not property reflect the content.
Moderators may move threads if they have been posted in the incorrect forum.
Threads/Posts questioning specific moderator decisions or actions (such as "why was a user banned?") are not allowed and will be removed.
The owners of Alpha Software Corporation (Forum Owner) reserve the right to remove, edit, move, or close any thread for any reason; or ban any forum member without notice, reason, or explanation.
Community members are encouraged to click the "Report Post" icon in the lower left of a given post if they feel the post is in violation of the rules. This will alert the Moderators to take a look.
Alpha Software Corporation may amend the guidelines from time to time and may also vary the procedures it sets out where appropriate in a particular case. Your agreement to comply with the guidelines will be deemed agreement to any changes to it.
Bonus TIPS for Successful Posting
Try a Search First
It is highly recommended that a Search be done on your topic before posting, as many questions have been answered in prior posts. As with any search engine, the shorter the search term, the more "hits" will be returned, but the more specific the search term is, the greater the relevance of those "hits". Searching for "table" might well return every message on the board while "tablesum" would greatly restrict the number of messages returned.
When you do post
First, make sure you are posting your question in the correct forum. For example, if you post an issue regarding Desktop applications on the Mobile & Browser Applications board , not only will your question not be seen by the appropriate audience, it may also be removed or relocated.
The more detail you provide about your problem or question, the more likely someone is to understand your request and be able to help. A sample database with a minimum of records (and its support files, zipped together) will make it much easier to diagnose issues with your application. Screen shots of error messages are especially helpful.
When explaining how to reproduce your problem, please be as detailed as possible. Describe every step, click-by-click and keypress-by-keypress. Otherwise when others try to duplicate your problem, they may do something slightly different and end up with different results.
A note about attachments
You may only attach one file to each message. Attachment file size is limited to 2MB. If you need to include several files, you may do so by zipping them into a single archive.
If you forgot to attach your files to your post, please do NOT create a new thread. Instead, reply to your original message and attach the file there.
When attaching screen shots, it is best to attach an image file (.BMP, .JPG, .GIF, .PNG, etc.) or a zip file of several images, as opposed to a Word document containing the screen shots. Because Word documents are prone to viruses, many message board users will not open your Word file, therefore limiting their ability to help you.
Similarly, if you are uploading a zipped archive, you should simply create a .ZIP file and not a self-extracting .EXE as many users will not run your EXE file.
See more
See less
Set value of another field based on check box
Collapse
X
-
Re: Set value of another field based on check box
there is something that makes the data go away after a second or so, may be alpha is getting ready to get new data there.
I am not that sure.
I will test little later and report back on the flickering date data
Leave a comment:
-
Re: Set value of another field based on check box
I tried on a grid, you are correct it comes and goes away, but sticks on new data entry in the detail section.
I have removed the second "/" I the current example.
the code as I have now should work with the correction.
that's what happens when you rush to reply in the early hours of morning.
sorry for the misinformation
Leave a comment:
-
Re: Set value of another field based on check box
Sorry I got excited...saw a date pop into the field...pre-mature e-click-ulation I guess...lol.
I tried:
var policy_received={grid.Object}.getValue('G','POLICY_RCVD',{Grid.RowNumber});
var today=new Date();
if (policy_received=='1') {
{grid.Object}.setValue('G','POL_RCVD_DATE',{Grid.RowNumber},today);
The Result is: Tue Oct 07 2014 17:20:23....
Depending on what you want your result to look like this did work.
Leave a comment:
-
Re: Set value of another field based on check box
yes they were an oversight on my part but, I deleted my code to go back to check it in my computer.
thanks for letting me know.
I redid the dialog, you are correct, I made those errors. it was an oversight on my part
the correct code would be
Code:var policy_received = {dialog.Object}.getValue('POLICY_RECEIVED'); for dialog: var today = new Date(); var mm = today.getMonth()+1; var dd = today.getDate(); var yy = today.getFullYear(); var t_date = mm+"/"+dd+"/"+yy; if (policy_received == "Yes") { {dialog.Object}.setValue('DATE_RECEIVED',t_date); }
thanks.
Leave a comment:
-
Re: Set value of another field based on check box
Hi Gandhi,
First thanks for sharing the code here for updating the date field via javascript, I tend to do this kind of updates on the server side events CanUpdateRecord and CanInsertRecord but after looking at your suggestion I decided to give it a try and found couple of things:
Your js date construct for todays date is not returning the correct date:
var mm = today.getMonth(); this will return the month from 0 to 11, so it must be incremented by one for current month.
var dd = today.getDay(); this will return the current day of the week from 0-6 not the day of the month today.getDate() should be used.
var t_date = mm+"/"+dd+"/"+"/"+yy; this have an extra "/" should be var t_date = mm+"/"+dd+"/"+yy;
I am testing this from a grid detail view so I created this js function and in my case the checkbox is treated as a logical field true/false:
Code://When user signs this report, update the arSignatureDate //Code sample provided by Govindan Gandhi // https://forum.alphasoftware.com/showthread.php?112060-Set-value-of-another-field-based-on-check-box&p=681114&viewfull=1#post681114 function jsValidateReportSigned(){ var annualReportSigned = {grid.Object}.getValue('D','ARSIGNED'); if (annualReportSigned == true) { var today = new Date(); var mm = today.getMonth() + 1; var dd = today.getDate(); var yy = today.getFullYear(); var t_date = mm+"/"+dd+"/"+yy; {grid.Object}.setValue('D','ARSIGNATUREDATE',t_date); }else{ {grid.Object}.setValue('D','ARSIGNATUREDATE',''); } }
Would you please verify if the changes to get today's date are correct and any idea why when assigning the value with "{grid.Object}.setValue('D','ARSIGNATUREDATE',t_date);" to the detail view it flashes and does not get updated first time?
Thanks!!!
Leave a comment:
-
Re: Set value of another field based on check box
Thank you Gandhi...that worked great! Just changed the field names to match mine.
Appreciate the help.
Leave a comment:
-
Re: Set value of another field based on check box
google redirected here :-)
Code:var policy_received = {dialog.Object}.getValue('POLICY_RECEIVED'); for dialog: var today = new Date(); var mm = today.getMonth(); var dd = today.getDay(); var yy = today.getFullYear(); var t_date = mm+"/"+dd+"/"+"/"+yy; if (policy_received == "Yes") { {dialog.Object}.setValue('DATE_RECEIVED',t_date); }
Code:for grid: var policy_received = {grid.Object}.getValue('G','POLICY_RECEIVED',{Grid.RowNumber}); var today = new Date(); var mm = today.getMonth(); var dd = today.getDay(); var yy = today.getFullYear(); var t_date = mm+"/"+dd+"/"+"/"+yy; if (policy_received == "Yes") { {grid.Object}.setValue('G','DATE_RECEIVED',{Grid.RowNumber},t_date); }
Leave a comment:
-
Re: Set value of another field based on check box
Thanks Govindan...
I have it on the onClick event of the check box so I'm in the right place. I have no idea now construct the date from javascript date object...going to have to Google that.
Leave a comment:
-
Set value of another field based on check box
Hi All...
Been trying to figure out how to set the value of a field when a check box is checked. So...
When Policy_Rcvd is checked Pol_Rcvd_Date is populated with today's date.
I tried a client side calc and failed.
Now I'm trying a client side onClick event
I have:
setValue('G', POL_RCVD_DATE,{grid.RowNumber},now()[,honorChangeEvent]);
Obviously I'm doing something wrong as it doesn't work.
Any help you can provide I'd greatly appreciate.
Thanks.
JoeTags: None
Leave a comment: