Re: User Defined Smart Fields and Browses
Now I am trying to figure out how to verify that the user picked a valid time since they could easily miss the need to change AM to PM or vice versa.
Ira mentions HERE that he has replacements for the time and calendar functions - perhaps he will share...
Announcement
Collapse
The Alpha Software Forum Participation Guidelines
The Alpha Software Forum is a free forum created for Alpha Software Developer Community to ask for help, exchange ideas, and share solutions. Alpha Software strives to create an environment where all members of the community can feel safe to participate. In order to ensure the Alpha Software Forum is a place where all feel welcome, forum participants are expected to behave as follows:
Be sure all comments and threads you post are respectful. Posts that contain any of the following content will be considered a violation of your agreement as a member of the Alpha Software Forum Community and will be moderated:
If a thread or post is found to contain any of the content outlined above, a moderator may choose to take one of the following actions:
Moderators may also rename posts and threads if they are too generic or do not property reflect the content.
Moderators may move threads if they have been posted in the incorrect forum.
Threads/Posts questioning specific moderator decisions or actions (such as "why was a user banned?") are not allowed and will be removed.
The owners of Alpha Software Corporation (Forum Owner) reserve the right to remove, edit, move, or close any thread for any reason; or ban any forum member without notice, reason, or explanation.
Community members are encouraged to click the "Report Post" icon in the lower left of a given post if they feel the post is in violation of the rules. This will alert the Moderators to take a look.
Alpha Software Corporation may amend the guidelines from time to time and may also vary the procedures it sets out where appropriate in a particular case. Your agreement to comply with the guidelines will be deemed agreement to any changes to it.
Bonus TIPS for Successful Posting
Try a Search First
It is highly recommended that a Search be done on your topic before posting, as many questions have been answered in prior posts. As with any search engine, the shorter the search term, the more "hits" will be returned, but the more specific the search term is, the greater the relevance of those "hits". Searching for "table" might well return every message on the board while "tablesum" would greatly restrict the number of messages returned.
When you do post
First, make sure you are posting your question in the correct forum. For example, if you post an issue regarding Desktop applications on the Mobile & Browser Applications board , not only will your question not be seen by the appropriate audience, it may also be removed or relocated.
The more detail you provide about your problem or question, the more likely someone is to understand your request and be able to help. A sample database with a minimum of records (and its support files, zipped together) will make it much easier to diagnose issues with your application. Screen shots of error messages are especially helpful.
When explaining how to reproduce your problem, please be as detailed as possible. Describe every step, click-by-click and keypress-by-keypress. Otherwise when others try to duplicate your problem, they may do something slightly different and end up with different results.
A note about attachments
You may only attach one file to each message. Attachment file size is limited to 2MB. If you need to include several files, you may do so by zipping them into a single archive.
If you forgot to attach your files to your post, please do NOT create a new thread. Instead, reply to your original message and attach the file there.
When attaching screen shots, it is best to attach an image file (.BMP, .JPG, .GIF, .PNG, etc.) or a zip file of several images, as opposed to a Word document containing the screen shots. Because Word documents are prone to viruses, many message board users will not open your Word file, therefore limiting their ability to help you.
Similarly, if you are uploading a zipped archive, you should simply create a .ZIP file and not a self-extracting .EXE as many users will not run your EXE file.
- Be professional in your conduct
- Be kind to others
- Be constructive when giving feedback
- Be open to new ideas and suggestions
- Stay on topic
Be sure all comments and threads you post are respectful. Posts that contain any of the following content will be considered a violation of your agreement as a member of the Alpha Software Forum Community and will be moderated:
- Spam.
- Vulgar language.
- Quotes from private conversations without permission, including pricing and other sales related discussions.
- Personal attacks, insults, or subtle put-downs.
- Harassment, bullying, threatening, mocking, shaming, or deriding anyone.
- Sexist, racist, homophobic, transphobic, ableist, or otherwise discriminatory jokes and language.
- Sexually explicit or violent material, links, or language.
- Pirated, hacked, or copyright-infringing material.
- Encouraging of others to engage in the above behaviors.
If a thread or post is found to contain any of the content outlined above, a moderator may choose to take one of the following actions:
- Remove the Post or Thread - the content is removed from the forum.
- Place the User in Moderation - all posts and new threads must be approved by a moderator before they are posted.
- Temporarily Ban the User - user is banned from forum for a period of time.
- Permanently Ban the User - user is permanently banned from the forum.
Moderators may also rename posts and threads if they are too generic or do not property reflect the content.
Moderators may move threads if they have been posted in the incorrect forum.
Threads/Posts questioning specific moderator decisions or actions (such as "why was a user banned?") are not allowed and will be removed.
The owners of Alpha Software Corporation (Forum Owner) reserve the right to remove, edit, move, or close any thread for any reason; or ban any forum member without notice, reason, or explanation.
Community members are encouraged to click the "Report Post" icon in the lower left of a given post if they feel the post is in violation of the rules. This will alert the Moderators to take a look.
Alpha Software Corporation may amend the guidelines from time to time and may also vary the procedures it sets out where appropriate in a particular case. Your agreement to comply with the guidelines will be deemed agreement to any changes to it.
Bonus TIPS for Successful Posting
Try a Search First
It is highly recommended that a Search be done on your topic before posting, as many questions have been answered in prior posts. As with any search engine, the shorter the search term, the more "hits" will be returned, but the more specific the search term is, the greater the relevance of those "hits". Searching for "table" might well return every message on the board while "tablesum" would greatly restrict the number of messages returned.
When you do post
First, make sure you are posting your question in the correct forum. For example, if you post an issue regarding Desktop applications on the Mobile & Browser Applications board , not only will your question not be seen by the appropriate audience, it may also be removed or relocated.
The more detail you provide about your problem or question, the more likely someone is to understand your request and be able to help. A sample database with a minimum of records (and its support files, zipped together) will make it much easier to diagnose issues with your application. Screen shots of error messages are especially helpful.
When explaining how to reproduce your problem, please be as detailed as possible. Describe every step, click-by-click and keypress-by-keypress. Otherwise when others try to duplicate your problem, they may do something slightly different and end up with different results.
A note about attachments
You may only attach one file to each message. Attachment file size is limited to 2MB. If you need to include several files, you may do so by zipping them into a single archive.
If you forgot to attach your files to your post, please do NOT create a new thread. Instead, reply to your original message and attach the file there.
When attaching screen shots, it is best to attach an image file (.BMP, .JPG, .GIF, .PNG, etc.) or a zip file of several images, as opposed to a Word document containing the screen shots. Because Word documents are prone to viruses, many message board users will not open your Word file, therefore limiting their ability to help you.
Similarly, if you are uploading a zipped archive, you should simply create a .ZIP file and not a self-extracting .EXE as many users will not run your EXE file.
See more
See less
User Defined Smart Fields and Browses
Collapse
X
-
Re: User Defined Smart Fields and Browses
A rather crucial error above kept this from working
Code:FUNCTION SIGN_IN_FocusButtonClick AS V ( ) if [COLOR="#0000FF"]browse1:[/COLOR]sign_in.value = "" then [COLOR="#0000FF"]browse1:[/COLOR]sign_in.value = time("0h:0m AM",now()) else dim vtime as Y vtime = ctot(ui_get_short_time("Sign In Time",time("0h:0m AM",now() ))) [COLOR="#0000FF"]browse1:[/COLOR]sign_in.value = time("0h:0m AM",vtime) end if topparent.commit() [COLOR="#0000FF"]browse1:[/COLOR]sign_in.refresh() END FUNCTION
Leave a comment:
-
Re: User Defined Smart Fields and Browses
Having watched both videos, neither of those methods Selwyn used will blank the value if the user selects the cancel button. IOW there is no way to trap the result and thus the field will always get updated. Too bad, I guess I can use another button to clear the field...
Leave a comment:
-
Re: User Defined Smart Fields and Browses
Well, I did send in a complaint that this info was not there earlier
Leave a comment:
-
Re: User Defined Smart Fields and Browses
https://www.alphasoftware.com/docume...0Five%20V9.xml
Trying again, link looks different this time.
Image 17.pngImage 18.png
Leave a comment:
-
Re: User Defined Smart Fields and Browses
I got the 404 page for that link
Leave a comment:
-
Re: User Defined Smart Fields and Browses
https://www.alphasoftware.com/docume...es/Index/Alpha Five V9.xml
but no pictures. Supposed to link to a video.
Leave a comment:
-
Re: User Defined Smart Fields and Browses
I cannot find a link to What's new in Version 9 anymore where this feature is explained. However it still exists in the legacy documentation - but of course without pictures.
I wanted to add the short time picker to a column in an embedded browse for a character field, and that field type option was not available - even though the time() function returns a character value. There is a focus_button property for each of the columns but it is not exposed in the properties editor. So this is how to do it:
In the OnInit event for the form set the icon for the button using this format browse_name:column_name.focus_button = "image_name"
Ex: browse1:SIGN_IN.focus_button = "$$control.clock"
Right click on the embedded browse and create a function in the Browse/Events (if you have other events already defined then the selection will be Browse/Events/Events)
use your own column name instead of SIGN_IN - and substituting ' this.value ' for sign_in.value ought to work as well and make it more generic since you are in the active field.
Code:FUNCTION SIGN_IN_FocusButtonClick AS V ( ) if sign_in.value = "" then sign_in.value = time("0h:0m AM",now()) else dim vtime as Y vtime = ctot(ui_get_short_time("Sign In Time",time("0h:0m AM",now() ))) sign_in.value = time("0h:0m AM",vtime) end if topparent.commit() sign_in.refresh() END FUNCTION
The nice part of using a smart field here instead of adding an unbound browse button, is that it only appears if the field is active instead of showing all the time.
Hope somebody else finds this useful because the option ought to be in the v12 desktop!Last edited by MoGrace; 07-17-2017, 03:29 PM.
Leave a comment:
-
User Defined Smart Fields and Browses
I am try to test the User Defined Smart Field in browses
The what's new in V9 describes how to set the udsm as follows
To define a smart-field, right click on the column and select Properties. On the 'Setup' tab, check the 'User Defined Smart Field' checkbox.
For a browse (both named and embedded) when you click on a column and then right click properties then set up tab - there is no check box for user defined smart fields.
Am I missing something?
Tom BakerTags: None
Leave a comment: