Probably something simple that I am missing. Anyone know how to do it?
Announcement
Collapse
The Alpha Software Forum Participation Guidelines
The Alpha Software Forum is a free forum created for Alpha Software Developer Community to ask for help, exchange ideas, and share solutions. Alpha Software strives to create an environment where all members of the community can feel safe to participate. In order to ensure the Alpha Software Forum is a place where all feel welcome, forum participants are expected to behave as follows:
Be sure all comments and threads you post are respectful. Posts that contain any of the following content will be considered a violation of your agreement as a member of the Alpha Software Forum Community and will be moderated:
If a thread or post is found to contain any of the content outlined above, a moderator may choose to take one of the following actions:
Moderators may also rename posts and threads if they are too generic or do not property reflect the content.
Moderators may move threads if they have been posted in the incorrect forum.
Threads/Posts questioning specific moderator decisions or actions (such as "why was a user banned?") are not allowed and will be removed.
The owners of Alpha Software Corporation (Forum Owner) reserve the right to remove, edit, move, or close any thread for any reason; or ban any forum member without notice, reason, or explanation.
Community members are encouraged to click the "Report Post" icon in the lower left of a given post if they feel the post is in violation of the rules. This will alert the Moderators to take a look.
Alpha Software Corporation may amend the guidelines from time to time and may also vary the procedures it sets out where appropriate in a particular case. Your agreement to comply with the guidelines will be deemed agreement to any changes to it.
Bonus TIPS for Successful Posting
Try a Search First
It is highly recommended that a Search be done on your topic before posting, as many questions have been answered in prior posts. As with any search engine, the shorter the search term, the more "hits" will be returned, but the more specific the search term is, the greater the relevance of those "hits". Searching for "table" might well return every message on the board while "tablesum" would greatly restrict the number of messages returned.
When you do post
First, make sure you are posting your question in the correct forum. For example, if you post an issue regarding Desktop applications on the Mobile & Browser Applications board , not only will your question not be seen by the appropriate audience, it may also be removed or relocated.
The more detail you provide about your problem or question, the more likely someone is to understand your request and be able to help. A sample database with a minimum of records (and its support files, zipped together) will make it much easier to diagnose issues with your application. Screen shots of error messages are especially helpful.
When explaining how to reproduce your problem, please be as detailed as possible. Describe every step, click-by-click and keypress-by-keypress. Otherwise when others try to duplicate your problem, they may do something slightly different and end up with different results.
A note about attachments
You may only attach one file to each message. Attachment file size is limited to 2MB. If you need to include several files, you may do so by zipping them into a single archive.
If you forgot to attach your files to your post, please do NOT create a new thread. Instead, reply to your original message and attach the file there.
When attaching screen shots, it is best to attach an image file (.BMP, .JPG, .GIF, .PNG, etc.) or a zip file of several images, as opposed to a Word document containing the screen shots. Because Word documents are prone to viruses, many message board users will not open your Word file, therefore limiting their ability to help you.
Similarly, if you are uploading a zipped archive, you should simply create a .ZIP file and not a self-extracting .EXE as many users will not run your EXE file.
- Be professional in your conduct
- Be kind to others
- Be constructive when giving feedback
- Be open to new ideas and suggestions
- Stay on topic
Be sure all comments and threads you post are respectful. Posts that contain any of the following content will be considered a violation of your agreement as a member of the Alpha Software Forum Community and will be moderated:
- Spam.
- Vulgar language.
- Quotes from private conversations without permission, including pricing and other sales related discussions.
- Personal attacks, insults, or subtle put-downs.
- Harassment, bullying, threatening, mocking, shaming, or deriding anyone.
- Sexist, racist, homophobic, transphobic, ableist, or otherwise discriminatory jokes and language.
- Sexually explicit or violent material, links, or language.
- Pirated, hacked, or copyright-infringing material.
- Encouraging of others to engage in the above behaviors.
If a thread or post is found to contain any of the content outlined above, a moderator may choose to take one of the following actions:
- Remove the Post or Thread - the content is removed from the forum.
- Place the User in Moderation - all posts and new threads must be approved by a moderator before they are posted.
- Temporarily Ban the User - user is banned from forum for a period of time.
- Permanently Ban the User - user is permanently banned from the forum.
Moderators may also rename posts and threads if they are too generic or do not property reflect the content.
Moderators may move threads if they have been posted in the incorrect forum.
Threads/Posts questioning specific moderator decisions or actions (such as "why was a user banned?") are not allowed and will be removed.
The owners of Alpha Software Corporation (Forum Owner) reserve the right to remove, edit, move, or close any thread for any reason; or ban any forum member without notice, reason, or explanation.
Community members are encouraged to click the "Report Post" icon in the lower left of a given post if they feel the post is in violation of the rules. This will alert the Moderators to take a look.
Alpha Software Corporation may amend the guidelines from time to time and may also vary the procedures it sets out where appropriate in a particular case. Your agreement to comply with the guidelines will be deemed agreement to any changes to it.
Bonus TIPS for Successful Posting
Try a Search First
It is highly recommended that a Search be done on your topic before posting, as many questions have been answered in prior posts. As with any search engine, the shorter the search term, the more "hits" will be returned, but the more specific the search term is, the greater the relevance of those "hits". Searching for "table" might well return every message on the board while "tablesum" would greatly restrict the number of messages returned.
When you do post
First, make sure you are posting your question in the correct forum. For example, if you post an issue regarding Desktop applications on the Mobile & Browser Applications board , not only will your question not be seen by the appropriate audience, it may also be removed or relocated.
The more detail you provide about your problem or question, the more likely someone is to understand your request and be able to help. A sample database with a minimum of records (and its support files, zipped together) will make it much easier to diagnose issues with your application. Screen shots of error messages are especially helpful.
When explaining how to reproduce your problem, please be as detailed as possible. Describe every step, click-by-click and keypress-by-keypress. Otherwise when others try to duplicate your problem, they may do something slightly different and end up with different results.
A note about attachments
You may only attach one file to each message. Attachment file size is limited to 2MB. If you need to include several files, you may do so by zipping them into a single archive.
If you forgot to attach your files to your post, please do NOT create a new thread. Instead, reply to your original message and attach the file there.
When attaching screen shots, it is best to attach an image file (.BMP, .JPG, .GIF, .PNG, etc.) or a zip file of several images, as opposed to a Word document containing the screen shots. Because Word documents are prone to viruses, many message board users will not open your Word file, therefore limiting their ability to help you.
Similarly, if you are uploading a zipped archive, you should simply create a .ZIP file and not a self-extracting .EXE as many users will not run your EXE file.
See more
See less
display logical field as checkbox in a list control
Collapse
X
-
display logical field as checkbox in a list control
Win 10 64 Development, Win 7 64 WAS 11-1, 2, Win 10 64 AA-1,2, MySql, dbForge Studio The Best MySQL GUI Tool IMHO. http://www.devart.com/dbforge/mysql/studio/Tags: None
-
Re: display logical field as checkbox in a list control
Have a look at this post... I think it's still valid.
http://msgboard.alphasoftware.com/al...X-List-Control
And there's some interesting information in video ux_v12-111
Comment
-
Re: display logical field as checkbox in a list control
Steve, yes and yes.
David, I looked at that thread earlier but I can't see how that applies to my case since I just want to display the existing data from an int(1) field in the table or I still am just not getting it. I will look at the video.
Thanks for the help.Win 10 64 Development, Win 7 64 WAS 11-1, 2, Win 10 64 AA-1,2, MySql, dbForge Studio The Best MySQL GUI Tool IMHO. http://www.devart.com/dbforge/mysql/studio/
Comment
-
Re: display logical field as checkbox in a list control
Thanks Steve, that was my first thought, however i don't see any dynamic properties for images in the list control. I will look again.
nevermind.... there it is... thanksWin 10 64 Development, Win 7 64 WAS 11-1, 2, Win 10 64 AA-1,2, MySql, dbForge Studio The Best MySQL GUI Tool IMHO. http://www.devart.com/dbforge/mysql/studio/
Comment
-
Re: display logical field as checkbox in a list control
Still having a slight issue with this. I have a dynamic image set up in the list. When the value is true the checked image show properly. I can't figure out how to make the unchecked image show. for the conditions I am using 'print' which is the logical int(1) field which shows up as type (L) in the field list.
so for the true condition i just use 'print'. For the false condition I have tried '! print','print = false', 'print = False',print = "false"' print = 0', 'print = .f.'. None of these shows the unchecked image.
If I set the condition to client side I only get the checked image.
Any ideas?
2014-11-08_16-35-42.jpgWin 10 64 Development, Win 7 64 WAS 11-1, 2, Win 10 64 AA-1,2, MySql, dbForge Studio The Best MySQL GUI Tool IMHO. http://www.devart.com/dbforge/mysql/studio/
Comment
-
Re: display logical field as checkbox in a list control
Here's another way of getting this done...
http://www.youtube.com/watch?v=MSAnketXT4c
Comment
-
Re: display logical field as checkbox in a list control
Hi Frank,
Originally posted by frankbicknell View PostStill having a slight issue with this. I have a dynamic image set up in the list. When the value is true the checked image show properly. I can't figure out how to make the unchecked image show. for the conditions I am using 'print' which is the logical int(1) field which shows up as type (L) in the field list.
so for the true condition i just use 'print'. For the false condition I have tried '! print','print = false', 'print = False',print = "false"' print = 0', 'print = .f.'. None of these shows the unchecked image.
If I set the condition to client side I only get the checked image.
Any ideas?
ConditionalImage.png
Comment
-
Re: display logical field as checkbox in a list control
Thanks everyone for your help. Edhy I hear what you are saying but I did try that and I could only get the checked image to show. I can't explain why it is not working for me either.
David, I used your method and it works as advertised. I wish I knew half as much about alpha's inner workings as you do. Thanks so much for your help.Win 10 64 Development, Win 7 64 WAS 11-1, 2, Win 10 64 AA-1,2, MySql, dbForge Studio The Best MySQL GUI Tool IMHO. http://www.devart.com/dbforge/mysql/studio/
Comment
-
Re: display logical field as checkbox in a list control
Interestingly if I put the false condition first it works. I guess I should have known that. Even though it is a little more wordy I like the result using David's method because the checkbox style matches the rest of my checkboxes. Thank you so much for your help.Win 10 64 Development, Win 7 64 WAS 11-1, 2, Win 10 64 AA-1,2, MySql, dbForge Studio The Best MySQL GUI Tool IMHO. http://www.devart.com/dbforge/mysql/studio/
Comment
-
Re: display logical field as checkbox in a list control
Hi Steve,
Originally posted by Steve Workings View PostEdhy is showing client side - here's what I use for Server-side with an MS SQL TinyInt.
[ATTACH=CONFIG]39153[/ATTACH]
Hmmm, I also use MS SQL but for logical fields I always used "Bit" field type instead of TinyInt even-though at the end it is all just 0/1.
I watched David Kates video and it is an interesting approach and I am sure I will use some of that logic sometime, I will also agree with Frank that because of the style of the checkbox being draw by the browser it looks better than showing an image. Perhaps AA can implement this logic for showing True/False 0/1 checkboxes automatically.
Comment
-
Re: display logical field as checkbox in a list control
Yay! I just used David's tips from the video and that is working great for me. So, of course.... now I want something to happen when user clicks the checkbox. I want to call a javascript function that will trigger an ajax callback to update the value in my field when a user clicks the checkbox.
Below is my current template (which works but passes no value to the function). I am failing in passing the value from the field into my javascript function poCheckMark() . The name of my field is USE_PO and I have tried onclick = "poCheckMark('{USE_PO}') and I have tried onclick = "poCheckMark({USE_PO}) and I get errors. I have tried putting a semi colon after the last parenthesis and I still get errors.
the following works as a template calls my function just giving an alert, but of course I need the value and need to do some if statements with it...
Code:<input type="checkbox" name="poCheckbox" id="poCheckbox{<ZeroBasedRowNumber>}" onclick = "poCheckMark()">
Comment
-
Re: display logical field as checkbox in a list control
Here's is how I've done the "real" working checkbox part...
This is my List Layout...
Code:<input type="checkbox" name="checkbox" id="checkbox{<ZeroBasedRowNumber>}" onclick="clickCheckbox({<ZeroBasedRowNumber>});" value="value"> {Firstname} {Lastname} {City}
I don't think you can put anything into the onclick function call except one of the system placeholders... iow... no data... but you don't need to.
The js function, clickcheckbox, can get whatever you need.
Here, I'm getting the value of the Firstname in the row I clicked... and I'm turning the checkbox on or off, depending on it's starting value...
Code:function clickCheckbox(row){ var currState = $('checkbox'+row).checked; var fn = {dialog.Object}.listGetValue('list1','FIRSTNAME',row); {dialog.Object}.__checkRow = row; if (currState == true){ setTimeout("$('checkbox'+{dialog.Object}.__checkRow).checked=true;",50); } else { setTimeout("$('checkbox'+{dialog.Object}.__checkRow).checked=false;",50); } }
Comment
Comment